Weekend Workshop · Free Starter Guide

Your First Weekend
in the Shop

One complete project, the tools that actually matter, and a look at the plan behind a full year of building.

Free guideIncludes a full build you can finish this weekend

Start here

Welcome to the shop.

Most people don't quit woodworking because it's hard. They stall because nobody told them what to build first, what to buy, or how to finish something in a single weekend. This guide fixes all three.

Inside you'll find a complete first project, the short list of tools that actually matter, and a look at how a full year of building fits together. Read it on Thursday. Build on Saturday.

The weekend rhythm

ThursdayRead the project from start to finish.
FridayBuy your lumber and supplies.
SaturdayBuild. Stop at a clean stopping point.
SundayFinish it, then put the tools away.

Small projects get finished. Finished projects teach you something. That is the whole idea.

What's inside

  1. The starter toolkitpage 3
  2. Weekend project: an edge-grain cutting boardpages 4 and 5
  3. A look inside the book: Weeks 2, 3 and 12page 6
  4. The 52-weekend roadmappage 7
  5. Black Friday: 50% off the full bookpage 8

Shop safety, every time

  • Wear safety glasses and hearing protection whenever a saw is running.
  • Use a push stick for narrow cuts, and never rip a thin strip freehand.
  • Clamp your work so both hands stay clear of the blade.
  • Wear a dust mask when you sand. Hardwood dust, walnut especially, can irritate lungs and skin.
  • Unplug the saw or remove the battery before changing a blade.
Weekend Workshop · Free Starter Guide50% off 52 Weekends with code WORKSHOP502

Before you buy anything

The starter toolkit.

Part I of 52 Weekends assumes almost nothing: a drill and a saw you probably already own. Here is what matters most, and what to do if something is missing.

ToolWhy it matters, and the workaround
Circular sawRips your strips and crosscuts every board in Part I. Clamp a straightedge to the wood and a circular saw cuts just as accurately as a table saw. It only takes longer.
Drill / driverPilot holes, screws, and plugs. Cordless is easier; corded works fine.
Clamps (at least 4)Glue-ups live or die by clamps. They need to open wider than your project. Bar or pipe clamps both work.
Speed square, tape, pencilSquare lines make square cuts. A speed square is the cheapest accuracy upgrade in any shop.
Sander or block planeFlattens a glue-up and softens edges. A random orbit sander is the easy choice; a block plane teaches you more.

Lumber lingo in 30 seconds

  • 4/4 (four-quarter): 1 in thick when rough, about ¾ in once surfaced smooth.
  • Board foot: how lumber is priced. One board foot is 1 in × 12 in × 12 in.
  • S4S: surfaced on four sides, ready to cut.
  • Buy 10 to 15% extra for mistakes and for cutting around flaws.

How to pick a good board

  • Sight down the length of the edge with one eye closed. It should be straight.
  • Lay it on a flat floor. If it rocks or cups, leave it.
  • Skip boards with cracks running through the ends.
  • Choose boards with straight, even grain. Wild grain is harder to rip and plane.
Weekend Workshop · Free Starter Guide50% off 52 Weekends with code WORKSHOP503

Week 1 of 52 Weekends · complete project

Edge-grain cutting board.

Nobody's first weekend in the shop needs to be impressive. It needs to teach one thing cleanly. This board is one glue-up, one flush pass, one round-over, and one finish, and a well-made one looks like it took real skill, because it did.

Alternating maple and walnut forgives small gaps at the joint lines, and gives you a real reason to care about grain direction.

FINISHED SIZEabout 18 × 8¼ × 1½ in
TIMEa weekend, about 3 hours hands-on
LEVELfirst project

What to buy

Hard maple, ¾ in thick × 6 in wide × 4 ft long (rip into six strips)×1 board
Walnut, ¾ in thick × 6 in wide × 4 ft long (rip into five strips, one spare)×1 board
Food-safe, waterproof wood glue×1 bottle
Sandpaper in 120, 180 and 220 grit; food-safe mineral oil; cotton ragsas needed

Each strip finishes at 1½ in wide × ¾ in thick. Cut them about 19 in long so you can trim the ends square after the glue-up. You will use 6 maple and 5 walnut.

Tools

  • Table saw, or circular saw with a clamped straightedge
  • 4 clamps that open at least 10 in
  • Block plane or sander (80 grit to start)
  • Optional: router with a round-over bit

Your weekend plan

  • Thu: read the steps, check your tools
  • Fri: buy lumber and glue
  • Sat: rip, arrange, glue up. Leave it clamped as your glue label says (at least an hour), then let it cure overnight
  • Sun: flatten, trim, round, sand, oil
Weekend Workshop · Free Starter Guide50% off 52 Weekends with code WORKSHOP504

Week 1 · step by step

Build it in eight steps.

  1. Mill and rip. Joint one edge of each board flat, then rip into 1½ in strips with the jointed edge against the fence. Keep every strip exactly the same width, because the glue-up only looks intentional if the widths agree. Use a push stick on every cut. No jointer? Rip against a clamped straightedge to make the first straight edge.
  2. Arrange the pattern. Lay all eleven strips face up and alternate species, starting and ending with maple. Stand back and look before you glue anything. This is the last moment you can change your mind for free. Draw a triangle across the strips so you can put them back in the same order.
  3. Glue and clamp. Spread glue on both mating faces of every joint, stand the strips on edge, and clamp across the width in three places. Alternate clamps above and below the board to keep it flat. Wipe off squeeze-out while it is still wet, because dried glue won't take oil later.
  4. Flush the faces. Once cured, scrape off dried glue and flatten both faces with a block plane or sander, working diagonally across the grain first, then with it.
  5. Square the ends. Crosscut both ends square and trim the board to 18 in.
  6. Round the edges. Use a round-over bit around the top edge, or shape it by hand with a block plane and sandpaper for a softer look.
  7. Sand through the grits. 120, then 180, then 220. Wipe with a damp cloth between grits to raise the grain, then catch it on the next pass.
  8. Finish. Flood the surface with food-safe mineral oil, let it sit fifteen minutes, and wipe off everything that has not soaked in. Add a second coat later if the wood still looks thirsty.
Care note: mineral oil needs reapplying every few weeks. A board butter (mineral oil blended with beeswax) lasts longer and leaves a warmer sheen, worth the extra ten minutes if this board is a gift. Hand wash only, and never put it in the dishwasher.

Make it yours: swap the walnut for cherry or padauk for a warmer or brighter contrast strip.

Weekend Workshop · Free Starter Guide50% off 52 Weekends with code WORKSHOP505

You just finished Week 1

Here's what's next.

A look at Weeks 2, 3 and 12. Each one teaches the exact skill the weekend after it needs.

Week 2

Floating wall shelf

Teaches wall fixing and a true level line, using a hidden French cleat.

Pro tip: find your studs first and mark them lightly, low on the wall, where the cleat will hide the marks.

Inside the book: full cut list and measurements, tool list, 6-step build, finishing note.

Week 3

Basic step stool

Teaches simple butt joints and screws, and the detail that makes them look finished.

Pro tip: countersink every screw deep enough to hide a plug. That one habit turns a homemade stool into furniture.

Inside the book: full cut list and measurements, tool list, 7-step build, finishing note.

Week 12

Torsion box workbench top

The flagship build of Part I: a dead-flat top that is light, strong and cheap.

Pro tip: two thin plywood skins glued over a rib grid can be flatter than a solid slab, at a fraction of the cost and weight.

Inside the book: full cut list and measurements, tool list, 7-step build, finishing note.

That is three of 52. Page 7 shows how the whole year fits together.

Weekend Workshop · Free Starter Guide50% off 52 Weekends with code WORKSHOP506

The whole year

One of 52 done.

Each circle is a weekend. The gold one is the cutting board you just built.

Part I · Weeks 1 to 13

Foundations

  • Cutting board
  • Floating wall shelf
  • Basic step stool
  • Mitered frame set
  • Sawhorses
  • Spice rack
  • Sharpening station
  • Torsion box workbench top

Part II · Weeks 14 to 26

First Real Furniture

  • Library step ladder
  • Dovetail keepsake box
  • Shaker peg coat rack
  • Mudroom bench
  • Floating nightstand
  • Shaker end table
  • Fold-down desk
  • Rolling utility cart

Part III · Weeks 27 to 39

Outdoors & Garden

  • Media console
  • Trestle dining bench
  • Adirondack chair
  • Raised garden bed
  • Picnic table
  • Potting bench
  • Deck storage box
  • Birdhouse and bee hotel

Part IV · Weeks 40 to 52

Mastery & Capstone

  • Hand-cut dovetail drawer
  • Inset-door wall cabinet
  • Hand tool chest
  • Breadboard-end coffee table
  • Windsor stool
  • Writing desk
  • Backyard shed, in four weekends

Every weekend in the book includes a cut list with measurements, a tool list, a note on what to do if you are missing a tool, step-by-step instructions, a finishing note, and a variation to make it your own.

Turn the page for your Black Friday offer on the full book.
Weekend Workshop · Free Starter Guide50% off 52 Weekends with code WORKSHOP507
Black Friday offer

Keep building. The rest of the year is half price.

52 Weekends is the complete book behind this guide: every project, every cut list and measurement, in the order that builds real skill, from your first straight cut to a finished backyard shed.

52 Weekends book cover
$35$17.50

One payment. Instant digital download.

Use codeWORKSHOP50
  • All 52 projects with cut lists, tool lists and step-by-step instructions
  • 179 pages and 60 illustrations, one project per weekend
  • The four-weekend backyard shed capstone
  • A weekend-by-weekend planning tracker, included

Weeks 1, 2, 3 and 12, plus 48 more weekends inside.

Claim 50% off 52 Weekends →

Black Friday offer ends Monday, November 30, 2026.

The code is applied when you use the button above. If it isn't, enter WORKSHOP50 at checkout. Discount applies at checkout on Gumroad.

Weekend Workshop · Free Starter Guide50% off 52 Weekends with code WORKSHOP508